Bronze Reward Premium Maintenance Plan

Pre-Haul Inspection  A written version of the comprehensive checklist used by a Larsen Marine boat specialist as he conducts a personal inspection (Gold V.I.P.) is made available for use by the boat owner. We send this checklist to you prior to your scheduled haul out, and you may use it as a guide to assess the current condition of your boat. This is an important tool, as it documents the current status of your boat’s systems and functions, performance observations and service history. Your responses and notes help our boat managers review your immediate needs and anticipate future ones. We maintain copies in your boat file for reference.

In Season Services

• Harbor calls for service incur no fixed fee or travel time charges, for harbors from Chicago to Milwaukee.
• Enjoy a 5% year-round discount on over-the-counter Ship’s Store boating supplies, accessories, brokerage listing fees, dock lines, rigging, apparel and more. Hard parts and electronics excluded.
• Optional—Consigned Spare Parts/Fluids kit on-board:  A basic spare parts/fluid kit for your boat is assembled and placed on-board for your use should it become necessary. The parts and fluids contained in the kit are based on your boat and engine type as well as the assessment of where the risk factors are with your engine/boat systems. You don’t pay for this parts kit until you return in the fall. You then pay for only what you have used.

Cleaning

Exterior:

• Pressure Wash to Clean Bottom  The first step is a high-pressure wash of below-waterline surfaces. Our standard storage agreement includes this service. Every boat stored at Larsen Marine, inside and outside, gets a high-pressure bottom wash.
• Hand Wash Exterior Surfaces including Hull, Topsides, Cockpit and Deck  Using an environmentally friendly detergent, we scrub and rinse all exterior surfaces for a superior cleaning in preparation for polishing and conditioning. All boats are hand washed and dried.
• Buff and Wax Hullsides  Once inside our building, we buff hull sides with a compound using a power buffer as needed to clean, remove discoloration, revitalize appearance, and remove surface scratches and scuffs. We follow it with a coat of paste wax to protect, shine and seal the finish.

Below Deck:

• Head and Galley  We clean and wipe down all surfaces and countertops with a disinfectant. We also clean inside cabinets, the refrigerator and stove.
• Windows  Clean windows and hatches with a non-alcohol based window cleaner.
• Store with an Odor/Moisture Absorbing product in the cabin.

Bottom Painting

Bottom prep includes removal of any flaking paint, masking off the waterline, topsides, shaft, transducers, and other areas. A light sanding using a vacuum sander prepares the bottom for an application of a fresh coat of VC-17, Interlux Bottomkote or comparable paint. Unless you are getting a racing bottom, we finish the painting process in the spring, painting under the pads or cradle supports and keel just prior to launching.

Inspections

• Thru Hulls  Inspect and lube shut off valves, inspect condition of hoses, clamps and fittings.
• Batteries  Load test for condition, fill, and charge prior to launch.

General Mechanical Inspections:

• Perform 18 Point Engine Checklist  Marine certified mechanics perform an 18 point check of your engine, including visual inspections of fluid levels, hoses, belts, wires, cables, shafts, alternator output and related systems.
• Exhaust system  Visually inspect exhaust system—hoses, manifolds, risers, gaskets.
• Sanitation  Inspect head, hoses, waste tank, valves and thru hulls.
• Air Conditioning  Inspect condition of hoses, strainers, valves.
• Cooling System  Inspect condition of hoses, pumps, strainers, gaskets.
• Inspect for Wear  Propeller condition, cutlass bearing.

Other Storage/Prep Services

• Pump out and rinse holding tank
• Add fuel conditioner
• Install Visqueen Cover on Inside Boats

To order the Bronze Reward Premium Service Maintenance Plan, please contact:

Dan Moriarity
847-336-5456 x833